Rope products are usually long in length. In order to facilitate use and sale, the rope needs to be stored and transported in a specific length. Beating the rope is one of the commonly used treatment methods. The rope formed after the beat is small in size, which is convenient for transportation and storage.

         At present, the common way of playing is mainly manual winding. The rope is wound on the fixed arm of the rope by manpower, which not only has low efficiency, but also has high labor cost.

          In order to facilitate the sale and export of the rope, it is necessary to wind the longer rope into a rope handle with a specified length. First, it needs to be wound longitudinally, and then it is wound laterally outside the longitudinally wound rope, and finally wound into a rope handle.